Application
The unarmoured LSOH versions (Part 1 Type 1) are generally use for indoor installation and suitable for wet and damp areas. Generally used within industrial process manufacturing plants for communication, data and voice transmission signals and services, Also used for the interconnection of electrical equipment and instruments, the LSOH sheath can reduce toxic smoke and fume emission.
Construction
Conductor:
Annealed or tinned copper, sizes: 0.5mm² and 0.75mm² mulitistranded(Class 5), 0.5mm², 1.0 mm² solid(Class 1), 1.5mm² or 2.5mm², multistranded(Class 2) to BS6360
Insulation:
XLPE (Cross Linked Polyethylene), or PE (optional) Pairing Two insulated conductors uniformly twisted together with a lay not exceeding 100mm
Colour code:
See technical information
Individual screen:
Aluminium/polyester tape is applied over each pair metallic side down in contact with tinned copper drain wire, 0.5mm²
Binder tape:
PETP transparent tape
Collective screen:
Aluminium/polyester tape is applied over the laid up pairs metallic side down in contact with tinned copper drain wire, 0.5mm²
Outer sheath:
LSOH(Low Smoke Zero Halogen) sheath Flame retardant to IEC60332-3-22 Halogen free to IEC60754-1 Low smoke emission to IEC61034-1-2
Sheath colour:
Black or blue
Mechanical and Electrical Properties
Operating temperature: -20˚C up to + 90˚C( fixed installation)
0˚C to +50˚C(during operation)
Minimum bending radius: 5 x overall diameter
Parameter
Contact: Alice Wong
Phone: +86 18202169643
Tel: +86 18202169643
Email: alice@sh-cables.com,lisa@sh-cables.com,cedric@sh-cables.com
Add: No.7577 Hunan Road, Pudong district, Shanghai, China